Wi-Fi

WiFi, also known as WLAN (Wireless Local Area Network), is the wireless signal transmitted from your Router, Wireless Access Point or Mobile Hotspot, enabling access to your local and internet networks. Your standard router will usually have WiFi functionality built-in as they tend to be sold as an all-in-one networking solution. However, routers often need to be placed near your ADSL/NBN internet connection port (phone line), often resulting in sub-optimal positioning for your router's WiFi signal.

Adding a simple wireless access point allows you to move, expand and improve your local wireless area network. Access points simply connect to your existing router or switch, either by cable or wireless, allowing you to move your routers broadcast signal to a more optimal location- such as a central location within the home or business. You can add multiple access points to increase your wireless coverage to cover large areas, add wireless mesh points to reach areas that lack physical cabling, and even bridge across large distances using point-to-point wireless bridges.

We provide on-site network analysis and advice on improving your existing WiFi coverage and performance. We also provide on-site installation, configuration and troubleshooting. Email greg@lincolncomputercentre.com.au for further information.

Ubiquiti UniFi AC LITE PoE Wireless Access Point $169.00 inc GST

  • For indoor use

  • 802.11 a/b/g/n/ac dual-band 300/867 Mbps

  • 2x2 MIMO dual-band antennas @ 3dBi gain each

  • 1 x Gigabit Ethernet port

  • PoE adaptor (injector) included

  • Ubiquiti 12-month RTB warranty

Affordable option for adding wireless connectivity to a router that lacks wireless support, or move your current wireless signal to a more optimal location within the home or business.

Ubiquiti UniFi AC PRO PoE Wireless Access Point $249.00 inc GST

  • For indoor or outdoor use

  • 802.11 a/b/g/n/ac dual-band 450/1300 Mbps

  • 3x3 MIMO dual-band antennas @ 3dBi gain each

  • Supports power over 802.3af/802.3at PoE+ compatible switch

  • 2 x Gigabit Ethernet ports

  • PoE adaptor (injector) included

  • Ubiquiti 12-month RTB warranty

33% faster than the AC LITE, 1 extra Gigabit port, and can be installed outdoors. Great for Business. Multiple access points can be joined together for wide, seamless connectivity.

Ubiquiti UniFi NanoHD PoE Wireless Access Point $274.00 inc GST

  • For indoor use

  • 802.11 a/b/g/n/ac dual-band 300/1733 Mbps

  • 4x4 MIMO dual-band antennas @ 3dBi gain each

  • Supports power over 802.3af PoE compatible switch

  • 1 x Gigabit Ethernet port

  • PoE adaptor (injector) included

  • Ubiquiti 12-month RTB warranty

30% smaller form factor, faster 5G network performance, available in custom skins. Multiple access points can be joined together for wide, seamless connectivity.

Ubiquiti Unifi Mesh AC PoE Wireless Access Point $175.00 inc GST

  • For indoor or outdoor use

  • 802.11 a/b/g/n/ac dual-band 300/867 Mbps

  • 2x2 MIMO dual-band antennas @ 3dBi gain each

  • Supports power over 802.3af PoE compatible switches

  • 1 x Gigabit Ethernet Port

  • PoE adapter (injector) included

  • Ubiquiti 12-month RTB warranty

Mesh Wireless Access Points provide wireless connectivity to areas without physical cabling or Ethernet ports. Multiple mesh points can be joined together to form a wireless mesh network.

Wireless Bridge

If you need to share your internet connection between two buildings at some distance, this is a good option. You will need

  • 2 x Ubiquiti NanoBeam Outdoor Wireless Devices @ $200.00 each inc GST

    • Plus a separate wireless access point in the second building if required approx $150

  • Physical installation of each device

    • Ideally mounted on the fascia board of each building

    • Pointed at each other ie must be line of sight between the two devices

    • Cable run from each device down inside each building

      • Standard Ethernet cable, can be the weatherproof edition

      • Connect to modeo/router in main building

      • Connect to computer or wireless access point in second building

        • Depending on your purpose

        • Often connected directly to a Solar Inverter in the shed

        • Can be connected to a Wireless Access Point to share the internet in the second building

    • Cost estimate from $500 depending on a whole range of physical factors

      • Get a quote from your favourite electrician or cabling expert

  • Network setup

    • To get everything talking to each other and all of your devices working as required

    • Cost estimate around $300 if everything goes smoothly

      • An LCC technician will visit and configure everything

A conversation with us will assess the viability of this solution for your circumstance